低应变瞬态荷载作用下基桩动力响应解析解

目前广泛采用的基桩低应变检测问题的理论基础是基于平截面假定的一维应力波理论。而实际上,锤击产生的应力波是三维应力波,不仅沿桩身纵向传播,还沿径向传播,对于基桩低应变检测问题平截面假定实际上是不成立的。此时,一维纵波传播问题转换为应力波沿三维柱体传播问题。文章从基桩三维理论出发,忽略桩土径向位移,考虑桩体中应力波沿纵向和径向传播与桩土的相互作用,建立三维条件下桩土系统瞬态振动计算模型,推导得到低应变瞬态荷载作用下基桩三维动力响应的解析解,以期为基桩低应变检测提供新的理论指导。     

交流干扰下不同组织X100钢在格尔木土壤模拟溶液中的腐蚀行为

目的 使用不同组织X100钢模拟焊接接头,探究在格尔木土壤模拟环境下,交流干扰对X100管线钢焊接接头腐蚀行为的影响规律。方法 采用动电位极化曲线、恒电位极化曲线、浸泡实验及表面分析技术,对X100管线钢焊接接头的腐蚀行为进行系统研究。结果 动电位极化曲线表明,随着交流电流密度的增加,不同组织X100钢腐蚀电流密度呈增加的趋势,阴极由耗氧反应控制转变为由析氢反应主导。在交流干扰下,腐蚀速率V退火>V热轧>V正火,恒电位极化测试中,退火组织受到交流干扰的影响更为明显。不同组织X100钢腐蚀形态以局部腐蚀为主,且有不同程度的点蚀发生。退火组织的腐蚀坑数量多,尺寸大而深,点蚀多分布在珠光体与铁素体的晶界处,少数分布在珠光体内部;正火组织点蚀数量最少,尺寸最小;热轧组织中粒状贝氏体较多且呈弥散分布,有较多的小点蚀分布在粒状贝氏体聚集的区域。结论 不同组织X100管线钢因微观结构不同而导致其耐蚀性有所差异。交流干扰下,由于珠光体与铁素体组织形成的微电偶腐蚀较为严重,从而导致退火组织的耐腐蚀性最差;正火组织中M/A岛呈针状分布,粒状贝氏体相对较少,耐腐蚀性最好;热轧组织的耐蚀性居于退火组织与正火组织两者之间。     

重庆某输气管道地铁杂散电流干扰检测评价与防护案例研究

重庆某输气管道沿线与多条地铁、轻轨交叉并行,管道阴极保护系统受干扰严重。为了认识管道沿线阴极保护水平和真实干扰情况,对其阴极保护参数进行了现场测试。根据测试结果,分析获得了管道沿线干扰大小的分布情况。基于分析结果,利用智能抗干扰恒电位仪开展现场馈电试验。结果表明,在合理分布辅助阳极地床的情况下,利用强制电流阴极保护和牺牲阳极相结合的方法可以将管道的干扰水平控制在可接受范围内。该研究成果可为油气管道动态直流干扰的分析和防护设计提供参考。     

The lethal giant larvae Gene in Tribolium castaneum: Molecular Properties and Roles in Larval and Pupal Development as Revealed by RNA Interference

We identified and characterized the TcLgl gene putatively encoding lethal giant larvae (Lgl) protein from the red flour beetle (Tribolium castaneum). Analyses of developmental stage and tissue-specific expression patterns revealed that TcLgl was constitutively expressed. To examine the role of TcLgl in insect development, RNA interference was performed in early (1-day) larvae, late (20-day) larvae, and early (1-day) pupae. The early larvae injected with double-stranded RNA of TcLgl (dsTcLgl) at 100, 200, and 400 ng/larva failed to pupate, and 100% mortality was achieved within 20 days after the injection or before the pupation. The late larvae injected with dsTcLgl at these doses reduced the pupation rates to only 50.3%, 36.0%, and 18.2%, respectively. The un-pupated larvae gradually died after one week, and visually unaffected pupae failed to emerge into adults and died during the pupal stage. Similarly, when early pupae were injected with dsTcLgl at these doses, the normal eclosion rates were reduced to only 22.5%, 18.0%, and 11.2%, respectively, on day 7 after the injection, and all the adults with abnormal eclosion died in two days after the eclosion. These results indicate that TcLgl plays an essential role in insect development, especially during their metamorphosis.     

Analysis of weld pool vibration characteristics in pulsed gas metal arc welding

Using highspeed camera image measuring and processing, the contour of the weld pool was extracted accurately in pulsed metal inert gas (P-MIG) welding. Based on this extraction method, time and frequency domain characteristics at different points along the contour of the weld pool were analyzed for one pulse one droplet and one pulse two droplets, respectively. The results show that, because of the wave super position that was created by the pulsed arc and droplet impacting the weld pool, the oscillation amplitude along the weld pool fluctuated and decreased with an increase in distance from the point to the arc center. The oscillation near the arc center was complex and intense for one pulse two droplets, and the amplitude were relatively small because the oscillation caused by the pulsed arc could be offset by the molten droplet impact. The weld pool oscillation that was caused by the pulsed arc was stronger than that caused by the droplet.     

普利生C2000-A全自动血凝仪的性能验证

目的对全自动血凝仪普利生C2000-A进行性能验证,以确定其是否符合临床检测要求。方法参照美国临床实验室标准化委员会（NCCLS）标准,应用定值质控血浆或（和）定标血浆,选择凝血常规项目[D-二聚体（DD）、血浆凝血酶原时间（PT）、活化部分凝血活酶时间（APTT）、凝血酶原时间测定（TT）、纤维蛋白原（FIB）]对仪器分析系统的精密度、正确度、携带污染率、线性范围、抗干扰能力（干扰物为血红蛋白、直接胆红素和三酰甘油）以及通道一致性等性能进行验证和初步评价。结果所有凝血检测项目中,批内精密度均小于3%,批间精密度均小于5%;定值质控品或者定值校准品的结果与各自靶值相比其偏差均少于8%;线性验证标本按一定比例稀释后将所得理论值与实测值进行回归分析,a值均介于0.97-1.03范围内,r均大于0.975,符合线性相关要求;携带污染率均小于3%;干扰试验的偏离值均小于3%;在4个通道上各项目的测定结果差异均无统计学意义（P〉0.05）,说明其通道一致性良好。结论国产血凝仪普利生C2000-A全自动血凝仪具有良好的分析性能,其准确度、精密度、线性范围、携带污染率等指标均符合质量管理要求,特别是其对溶血、黄疸以及脂浊标本具有较强的抗干扰能力,可完全满足临床检测要求。     

A downlink beamforming assisted by locally positioned communication devices

Recently, multiple cell types with overlapping coverage have been deployed simultaneously to increase cellular network capacity. Cross‐tier interference is one of the key technical challenges in the use of this method. A simple and practical beamforming scheme assisted by locally positioned communication devices for the downlink of a multi‐cell wireless hierarchical cell structure system is proposed in this paper to maximize the capacity of the embedded small cell and simultaneously ensure minimal impact on the performance of existing macrocells. The locally positioned communication devices can be implemented with low complexity and at low cost and can continuously provide helpful and accurate information to base stations for the proper configuration of geographical cell coverage, allowing neighboring cells to cooperate effectively with each other. Simulation results verify that the proposed scheme can provide a significant gain over conventional systems not using the proposed algorithm. Copyright © 2013 John Wiley & Sons, Ltd.     

On the capacity of the state‐dependent interference relay channel

This paper considers the state‐dependent interference relay channel (SIRC) in which one of the two users may operate as a secondary user and the relay has a noncausal access to the signals from both users. For discrete memoryless SIRC, we first establish the achievable rate region by carefully merging Han‐Kobayashi rate splitting encoding technique, superposition encoding, and Gelfand‐Pinsker encoding technique. Then, based on the achievable rate region that we derive, the capacity of the SIRC is established in many different scenarios including (a) the weak interference regime, (b) the strong interference regime, and (c) the very strong interference regime. This means that our capacity results contain all available known results in the literature. Next, the achievable rate region and the associated capacity results are also evaluated in the case of additive Gaussian noise. Additionally, many numerical examples are investigated to show the value of our theoretical derivations.     

孔间超短延时台阶爆破干扰降振技术

为寻求台阶爆破降振效果最佳的孔间延时时间,借助ANSYS/LS-DYNA程序对台阶爆破在不同延时起爆时间条件下产生的爆破振动进行了数值模拟对比分析,并通过试验进行了验证。数值模拟和试验结果表明:在浅孔台阶爆破中,爆破降振效果最佳的孔间延时时间为5 ms;在深孔台阶爆破中,爆破降振最佳的孔间延时时间为7～10 ms。实际爆破施工中,不同的岩石条件下、不同的爆破参数时,数码雷管减振的最佳孔间延时应该在5～10 ms区间范围,应根据实际情况进行调整。研究成果解决了复杂环境下的爆破振动危害控制难题,研发的孔间超短延时台阶爆破干扰降振技术,为爆破振动控制要求严格的工程设计和施工提供参考和借鉴。     

LTE系统多小区上行联合功控算法

针对传统的小区内开环功率控制算法通常以提升本小区的吞吐量性能为目标，忽略了当前小区用户对邻小区用户同频干扰的问题，为提升边缘用户性能的同时兼顾系统整体性能，提出了一种LTE系统小区间上行联合功率控制（UJPC）算法。该算法采用单基站三扇区为系统模型，以最优化系统吞吐量比例公平函数为目标，首先根据最小信干噪比（SINR）约束值和用户最大发射功率这两个约束条件得到相应的数学优化模型，然后采用连续凸近似的方法求解优化问题得出各个基站所管辖的小区内所有用户的最优发射功率。仿真结果表明，与基准的开环功控方案相比，联合功控方案在保证系统平均频谱利用率的情况下能够较大幅度地提高小区边缘频谱利用率，其最佳性能增益能达到50%。